Y&H 1200W Waterproof Micro Grid Tie Inverter DC22-50V to AC180-260V



Warranty service:
Our products provide 2-year free warranty and permanent after-sales services.

WVC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion, built-in high-performance maximum power point tracking MPPT function better able to track changes in the solar luminosity and control different output power, effectively capture and collect sunlight AC electric power transmission using the reverse transmission technology. The inverter output power can provide load priority use, extra electricity to the grid, Efficiently turns sunlight into clean and green power.

Rated voltage:220V
Recommend PV:4*250~300W
Reccommend PV (Voc):34~50V DC
MPPT Tracking voltage:28~40V DC
Maxi Input Current:52A
Rated output current:5A
Max units per branch:5PCS
Rrequency:Auto switch 50/60Hz
Ambient temperature:- 40℃to +65℃

User notice:
• Vmp(of a solar panel) must be in the MPPT Tracking range to ensure the good output efficiency
• Use solar panel ONLY connect to this equipment.
• This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly,and the power grid is working properly, When the power grid stopped working, it will also stop generating.
• Do NOT exceed PV panel(s) voltage over the Solar Grid Tie Inverter max input voltage.(Vmp>28V;Voc<50V)
• Do NOT exceed PV panel(s) power over the Grid Tie solar Inverter max input power.(4X300W)
• The positive and negative poles of the solar panel cannot be reversed. If you extend the solar panel cable. You need to be careful about this problem.
• Install away from direct sunlight and direct rain exposure.(Ventilated, dry, cool)

Regarding the heating problem of the inverter:
this is normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminum alloy material. Metal can conduct heat better. The inverter also has over-temperature protection if the temperature is high. Then the inverter will automatically reduce the working output efficiency. Or stop working. After cooling down, restart. It is recommended to install the inverter in a ventilated, dry and cool place.